Gateway 9315 User Manual

www.gateway.com

Current FCC regulations restrict actual data transfer rates over public telephone lines to 
53K. Other factors, such as line noise, telephone service provider equipment, or ISP 
limitations, may lower the speed even further.

If your system has a v.90 modem, the speed at which you can upload (send) data is limited 
to 33.6K. If your system has a v.92 modem, the speed at which you can upload data is 
limited to 48K. Your ISP may not support 48K uploads.

■

If the modem shares the telephone line with another device, make sure that the 
telephone line is not in use (for example, someone is on the telephone, or another 
modem is in use).

■

Shut down and restart your server.

■

Reinstall the modem device driver. For instructions, see 

.

■

Open your server and reseat the modem. For instructions, see 

.

■

Adjust the brightness and contrast controls to the center position.

■

Make sure that the monitor is plugged in and turned on. If the monitor is turned on, 
the power LED should be lit.

■

Check the port and cable for bent or damaged pins.

■

Connect your monitor to another computer, or connect a monitor that you know 
works to your server.

Make sure that the monitor warms up for at least 30 minutes before making a final 
judgment about color uniformity.

Make sure that:

■

The monitor is not positioned too close to another monitor, fan, or fluorescent light.

■

You demagnetize the screen using the monitor’s degauss feature. For more information 
on degauss, see the monitor’s documentation.