Gateway 9315 User Manual

www.gateway.com

Your server’s basic configuration includes one CD or DVD drive and as many as three SATA 
fixed hard drives. SATA hot-swap hard drives and a hot-swap backplane are optional. A 
USB diskette drive is also included (but not installed in the server).

As you prepare to install drives, remember:

■

You must install a diskette drive in the left converted hard drive bay.

■

Before you install a drive, see the drive’s documentation for information on 
configuring the drive, setting drive jumpers, and attaching cables.

■

You may need to configure the drives you install using the BIOS Setup utility. Press 
F2 at startup to open the BIOS Setup utility.

If you need to install a diskette drive into your server, you must install the diskette drive 
in one of the hard drive bays.

Follow the instructions in 

. Make 

sure that you turn off the server, then unplug the power cord and all other cables 
connected to the server.

Follow the instructions in 

.

Unlock the bezel (if necessary) and remove it by pulling it from the chassis.

Remove the left hot-swap hard drive carrier from the server.

An internal diskette drive can only be installed in a converted hard 
drive bay if the optional hot-swap backplane is installed in your server.

The diskette drive is not hot-swappable. Before installing or removing 
the drive, make sure that power is turned off and the power cord is 
unplugged.