iogear GCS1108 User Manual

31

Function

Description

1.  Press and hold [Num Lock]
2.  Press and release [-]
3.  Release [Num Lock]

Invoking hotkey setting mode 
 
Note: To exit HSM manually, press Esc or spacebar.

Invoke HSM, then press [h]

Change the HSM invocation keys from [Num Lock] to 
[Ctrl] and from [-] to [F12]

Invoke HSM, then press [t]

Switch port switching hotkey sequence between 
[Scroll Lock] [Scroll Lock] and [Ctrl] [Ctrl]

Invoke HSM, then press [F1]

Set keyboard operating platform to PC compatible

Invoke HSM, then press [F2]

Set keyboard operating platform to Mac compatible

Invoke HSM, then press [F3]

Set keyboard operating platform to Sun compatible

Invoke HSM, then press [F5]

Perform keyboard / Mouse reset on the port that has 
KVM focus. 
 
Note: You can also press and hold Port 1 and Port 2
front panel push button to perform keyboard / mouse 
reset.

Invoke HSM, then press [

←]

Invokes Skip mode and skips from the current port to 
the first accessible port previous to it

Invoke HSM, then press [

→]

Invokes Skip mode and skips from the current port to 
the next accessible port

Invoke HSM, then press [b]

Toggle hotkey beepers on or off

Invoke HSM, then press [X*] 
[Y*] [Enter]

Switches KVM focus to the computer that is 
connected to Port X in the 1st Level and Port Y in the
2nd Level 

Note: If you only have a single level installation, simply 
ignore the Y interval

Invoke HSM, then press [r] 
[Enter]

Restore default settings (Administrator ONLY)

Invoke HSM, then press [a] 
[Enter] 
or
Invoke HSM, then press [q] 
[Enter]

Invoke Auto Scan Mode

Note: Auto Scan can be paused and resume by 
pressing [p] or by a single left-click on the mouse