Huawei DR814Q User Manual

User Manual 
Aolynk DR814Q ADSL2+ Broadband Router 

5  Advanced Configuration

 

51 

 

Figure 5-16 Dynamic route settings 

Table 5-7 Description of dynamic route setting items 

IP Interface 

Select the interface to be configured with RIP. 

RIP Send 

Select the protocol version (RIP1/RIP2) used to send RIP route 
information. “None” indicates not to send route information. It is 
recommended to set this parameter the same as the neighboring 
router. 

RIP Accept 

Select the protocol version used to receive RIP route information. 
“Both” indicates to receive both RIP1 and RIP2 route information, 
and “None” indicates not to receive route information. It is 
recommended to set this parameter the same as the neighboring 
router. 

Send 
Multicast 

If RIP2 is selected to send RIP route information, this parameter is 
required to specify whether to send (true/false) multicast packets.

 

Click [Service] in the navigation bar to enter the corresponding page, where you can 

configure the DR814Q as an SNTP (simple network time protocol) client, SNMP 

(simple network management protocol) proxy or IGMP (Internet group management 

protocol) proxy. 

Configure the DR814Q as an SNTP client and thus you can obtain accurate time/date 

information from the corresponding SNTP server.