Huawei HG532 User Manual
4 Configuring the Wireless Network
Connection
If a wireless network adapter is installed on your computer, you can connect you
computer to the HG532 through a wireless connection.
computer to the HG532 through a wireless connection.
The hardware installation methods and driver installation methods of
wireless network adapters provided by different companies vary from
each other. For details, see the installation guide provided by the
wireless network adapter provider.
wireless network adapters provided by different companies vary from
each other. For details, see the installation guide provided by the
wireless network adapter provider.
Setting Up a Wireless Connection Through the WPS
Button
The HG532 supports the Wi-Fi Protected Setup (WPS) function. If your network
adapter also supports the WPS function, you can use the WPS function to set up a
wireless connection between your PC and the HG532 quickly. To set up a wireless
connection, do as follows:
Step 1 Enable the wireless network function, and set the wireless network name and
adapter also supports the WPS function, you can use the WPS function to set up a
wireless connection between your PC and the HG532 quickly. To set up a wireless
connection, do as follows:
Step 1 Enable the wireless network function, and set the wireless network name and
access password of the HG532, do as follows (taking the authentication type
WPA-PSK as an example):
1. Log in to the Web-based configuration utility of the HG532.
2. In the navigation tree on the left of the Web-based configuration utility,
WPA-PSK as an example):
1. Log in to the Web-based configuration utility of the HG532.
2. In the navigation tree on the left of the Web-based configuration utility,
choose Basic > WLAN.
3. Select the Enable WLAN option.
4. Enter a wireless network name in the SSID text box.
5. Select WPA-PSK from the Security drop-down combo box.
6. Enter an access password in the WPA pre-shared key text box.
7. Select AES from the WPA encryption drop-down combo box.
8. Click Submit to save the settings.
4. Enter a wireless network name in the SSID text box.
5. Select WPA-PSK from the Security drop-down combo box.
6. Enter an access password in the WPA pre-shared key text box.
7. Select AES from the WPA encryption drop-down combo box.
8. Click Submit to save the settings.
Step 2 Press the WPS button of the HG532 to enable the HG532 to enter the WPS
negotiation state.
Step 3 Enable the WPS negotiation function of the wireless network adapter on your
PC within two minutes, and then wait for a moment (typically 10s and at most
120s).
120s).
The WPS indicator of the HG532 becomes on from the blinking state, indicating that
the HG532 is connected to your PC through the WLAN. This state lasts 300s. Then the
WPS indicator turns off.
the HG532 is connected to your PC through the WLAN. This state lasts 300s. Then the
WPS indicator turns off.
10