Huawei WDR814IG User Manual
Aolynk WDR814(I)g ADSL2+ Wireless Router User Manual
3 Internet Access
33
without efforts by the IP address you exposed on the internet.
Dynamic Routing enables the Router to automatically adjust to physical changes in
the network
the network
’s layout and exchange routing tables with other routers. The Router
determines the network packets
’ route based on the number of hops between the
source and destination.
To set up a static route between the Router and another network, select a number
from the Static Routing drop-down list. (A static route is a pre-determined pathway that
network information must travel to reach a specific host or network.) Enter the
following data:
from the Static Routing drop-down list. (A static route is a pre-determined pathway that
network information must travel to reach a specific host or network.) Enter the
following data:
n
Destination IP Address –– The Destination IP Address is the address of the
network or host to which you want to assign a static route.
network or host to which you want to assign a static route.
n
Subnet Mask –– The Subnet Mask determines which portion of an IP address is
the network portion, and which portion is the host portion.
the network portion, and which portion is the host portion.
n
Gateway –– This is the IP address of the gateway device that allows for contact
between the Router and the network or host.
between the Router and the network or host.
n
Hop Count –– This is the rip protocol implementation parameter.
Depending on where the Destination IP Address is located, select LAN & Wireless or
WAN from the Interface drop-down menu.
WAN from the Interface drop-down menu.