IBM SAGP-845EV User Manual

Bi-directional parallel port Configurable to LPT1, LPT2, LPT3 or disabled

Supports EPP/ECP/SPP

Hardware monitor

Monitors power supply voltage and fan speed status

IrDA port

Supports Serial Infrared (SIR) and Amplitude Shift

Keyed IR (ASKIR) interface

USB port

Supports 4 USB2.0 ports for future expansion

Watchdog timer

− Programmable

− Reset generated when CPU does not periodically

trigger the timer

− The BIOS routine INT15 can be used to control the

watchdog and generate a system reset

VGA controller

− Built-in AGP2.0 4X 3D graphics engine

− Share system DDR SDRAM 8M

− Screen Resolution: up to 2048x1536x16 bit

Ethernet

− ICH4 Fast Ethernet controller, IEEE 802.3u Auto-

Negotiation support for 10BASET/100BASE-TX

standard

− One RJ45 connector is located on the mounting

bracket

Keyboard and PS/2 mouse

connector

− A 6-pin mini DIN connector is located on the

mounting bracket for easy connection to a

keyboard or PS/2 mouse.

− For alternative applications, a keyboard and a PS/2

mouse pin header connectors are also available on

board.

Audio

− CMI8738LX supports 6CH DAC for AC3 5.1 channel

purpose

− HRTF-based positional audio, support Directsound

3D and A3D interface

Compact flash

It can be used with a passive adapter (True IDE

Mode) in a Type I/II Socket.

Power consumption

− (PENTIUM 4: 2GHz, 1GB PC2100 DDR SDRAM)

+5V @ 4.46A, +12V @ 6.55A.

− (PENTIUM 4-M: 2.5GHz, 512MB PC2100 DDR

SDRAM) +5V @ 4A, +12V @ 3A.

Recommended: 350-watt or higher output power

supply

Operating temperature

0° ~ 60° C

(*CPU needs Cooler & silicone heat sink compound*)

WARNING!

1. Never run the processor without a heat sink (Cooler) properly and firmly

attached.

2. Please use ATX-12V power connector (PW2) to provide power to the CPU.