Proxim AP-2500 User Manual

199

Using the Command Line Interface

Figure A-11 Result of “show system” CLI Command

Set Static IP Address for the AP-2500 device

[Device Name]>set ipaddrtype static

[Device Name]>set ipaddr <fixed IP address of unit>

[Device Name]>set ipsubmask <IP Mask

(default = 255.0.0.0)>

[Device Name]>set ipgw <gateway IP address

(default = 10.0.0.1)>

[Device Name]>show network<CR>

NOTE

The IP Mask of the AP-2500 unit needs to match the IP Mask of your network.

Set a Network Name for each Wireless Interface

–

3 = wireless card in Slot A

–

4 = wireless card in Slot B

[Device Name]>set wif 3 netname <Network Name (SSID) for wireless card in Slot A>

[Device Name]>set wif 4 netname <Network Name (SSID) for wireless card in Slot B>

[Device Name]>show wif<CR>