Proxim AP-2000 User Manual

134

The Bootloader CLI is a minimal subset of the normal CLI used to perform initial configuration of the AP. This interface 
is only accessible via the serial interface if the AP does not contain a software image or a download image command 
over TFTP has failed.
The Bootloader CLI provides you with the ability to configure the initial setup parameters as well as download a 
software image to the device. 
The following functions are supported by the Bootloader CLI:

–

configuration of initial device parameters using the set command

–

show command to view the device’s configuration parameters

–

help command to provide additional information on all commands supported by the Bootloader CLI

–

reboot command to reboot the device

The parameters supported by the Bootloader CLI (for viewing and modifying) are:

–

System Name

–

IP Address Assignment Type

–

IP Address

–

IP  Mask

–

Gateway IP Address

–

TFTP Server IP Address

–

Image File Name (including the file extension)

The following lists display the results of using the help command in the Bootloader CLI:

The following lists display the results of using the show command in the Bootloader CLI: