Rosewill RNWB-11001 User Manual

including IP address, Subnet Mask, Default Gateway, etc. Click the Renew button to 

renew the IP parameters from your ISP. Click the Release button to release the IP 

parameters. 

¾

  MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet 

networks is 1500 Bytes. It is not recommended that you change the default MTU Size 

unless required by your ISP.   

¾

  Use These DNS Servers - If your ISP gives you one or two DNS addresses, select 

Use These DNS Servers and enter the primary and secondary addresses into the 

correct fields. Otherwise, the DNS servers will be assigned dynamically from your 

ISP.  

)

If you find error when you go to a website after entering the DNS addresses, it is likely that 

your DNS servers are set up improperly. You should contact your ISP to get DNS server 

addresses.  

¾

  Get IP with Unicast DHCP - A few ISPs' DHCP servers do not support the broadcast 

applications. If you cannot get the IP Address normally, you can choose this option. (It 

is rarely required.) 

Click the Save button to save your settings. 

2.  If your ISP provides a static or fixed IP Address, Subnet Mask, Gateway and DNS 

setting, select Static IP. The Static IP settings page will appear, shown in Figure 4-8. 

-40-