Quatech WLNB-ET Series User Manual

 
100-8007-141G  

AirborneDirect™ Ethernet Bridge User's Guide 

Page 25 

This chapter describes how to use the Airborne Control Center (ACC) to configure the 
AirborneDirect™ Ethernet Bridge.  The ACC is a user-friendly graphical-user interface (GUI) 
menu and data display. The interface is intuitive, allowing tasks to be performed simply by 
pointing and clicking your mouse. 

On the Windows XP Start menu, navigate to the Quatech submenu and click on Airborne 
Control Center.  The ACC scans the local subnet for Airborne devices and displays a list like the 
one shown in 

XX

Figure 5

XX

. 

 

Highlight the desired device and click the Select button.  The ACC displays the login page for 
the selected device as shown in 

XX

Figure 6

XX

. 

 

 

The MAC address for the device you wish to connect to can be found on the 
label located on the back of the enclosure.  

 

The 802.11b Bridge (ABDB or WLNB models) has a web interface available 
if the firmware does not contain the optional LEAP feature.  The web 
interface is virtually identical to the ACC interface, so all of the information in 
this chapter applies to the web interface also.  To access the web interface, 
enter the IP address of the Bridge in the address bar of the browser. The 
web interface requires Microsoft Internet Explorer 5 or later. 

 

The 802.11b/g Bridge (ABDG or WLNG models) have no web interface.