Raritan Computer CCA-0N-V5.1-E User Manual
Chapter 15: Advanced Administration
246
What is IP Isolation mode?
IP Isolation mode allows you to isolate clients from devices by placing
them on separate sub-networks and forcing clients to access the devices
through CC-SG. In this mode, CC-SG manages traffic between the two
separate IP domains. IP Isolation mode does not offer failover. If either
LAN connection fails, users will not have access.
them on separate sub-networks and forcing clients to access the devices
through CC-SG. In this mode, CC-SG manages traffic between the two
separate IP domains. IP Isolation mode does not offer failover. If either
LAN connection fails, users will not have access.
See
About CC-SG LAN Ports
(on page 242) for the locations of the
Primary LAN and Secondary LAN ports on each CC-SG model.
Note: Clustering cannot be configured when using IP Isolation mode.
Setup for IP Isolation mode:
When implementing IP Isolation mode for your CC-SG network:
Each CC-SG LAN port must be connected to a different sub-network.
Raritan devices must be connected to the Primary LAN only.
Clients to be isolated are connected to the Secondary LAN. Clients
that don’t need to be isolated may be connected to the Primary LAN.
See
that don’t need to be isolated may be connected to the Primary LAN.
See
Configure a Combination of Direct Mode and Proxy Mode
(on page 251).
Note: Isolated clients on the Secondary LAN will use Proxy mode.
The clients on the Primary LAN may use Direct mode. Set the
connection mode to "Both" to configure this combination.
The clients on the Primary LAN may use Direct mode. Set the
connection mode to "Both" to configure this combination.