Sagem 1500 User Manual
4 - Configuring the SAGEM F@st™ 1500 ADSL router
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of
E
E
E
E
Page 4-59
4.11.2 Remote
Management
By default, management access is only available to users on your local network. However, you
can also manage the SAGEM F@st™ 1500 ADSL Router from a remote host by entering the IP
address of a remote computer on this screen. Check the Enabled check box, and enter the IP
address of the Host Address and click “Apply”.
can also manage the SAGEM F@st™ 1500 ADSL Router from a remote host by entering the IP
address of a remote computer on this screen. Check the Enabled check box, and enter the IP
address of the Host Address and click “Apply”.
If you check Enabled and specify an IP address of 0.0.0.0, any remote host can
manage the SAGEM F@st™ 1500 ADSL Router.
manage the SAGEM F@st™ 1500 ADSL Router.
For remote management via WAN IP address you need to connect by using default
port 8080. Simply enter WAN IP address followed by :8080, for example,
http://212.120.68.20:8080.
port 8080. Simply enter WAN IP address followed by :8080, for example,
http://212.120.68.20:8080.
The Subnet Mask allows to limit IP source address to a range of sub-networks.