Sagem 1500 User Manual

Page of 138
2 - Description and physical installation
SAGEM F@st™ 1500 Reference Manual - 288053220-04
Reproduction and communication prohibited without the written permission of
 E
 E
 E
 E
Page 2-5
2.2 Physical 
Installation
2.2.1 Installation 
instructions
Environment
¾
  The SAGEM F@st™ 1500 must be installed and used inside a building.
¾
  The room temperature must not exceed 45°C.
¾
  The SAGEM F@st™ 1500 must be placed on a desktop.
¾
  The SAGEM F@st™ 1500 must not be exposed to strong sunlight or excessive heat.
¾
  The SAGEM F@st™ 1500 must not be placed in an environment subject to significant
steam condensation.
¾
  The SAGEM F@st™ 1500 must not be exposed to splashed water.
¾
  The SAGEM F@st™ 1500 casing must not be covered.
¾
  The SAGEM F@st™ 1500WG and its peripheral devices must not be used for outdoor
transmissions.
Power supply source
¾
  The SAGEM F@st™ 1500's mains adapter block must not be covered.
¾
  The SAGEM F@st™ 1500 router is supplied with its own power supply adapter. It must not
be used with any other adapter.
¾
  This Class II adapter does not need to be earthed. The connection to the electrical network
must comply with the information on its label.
¾
  Use a readily accessible mains outlet near to the router. The power supply lead is 2 m long.
¾
  Arrange the power supply lead to avoid any accidental disconnection of the power supply to
the router.
¾
  The SAGEM F@st™ 1500 is designed for connection to a TT or TN system power supply
network.
¾
  The SAGEM F@st™ 1500 is not designed for connection to an IT system electrical
installation (power supply with separate neutral).
¾
  Protection against short circuits and leaks between phase, neutral and earth must be
provided by the building's electrical installation. The power circuit for this equipment must be
fitted with 16 A overcurrent protection and differential protection.
¾
  The mains connection must be via a readily accessible, switched wall socket.
Maintenance
¾
  The casing must not be opened. This must be done only by personnel qualified and
approved by your supplier.
¾
  Do not use liquid or aerosol cleaning agents.
¾
  Never open the mains adapter block; this can expose you to mortal danger.