Quatech ABDB-ET Series User Manual
Hardware Installation
100-8007-141G AirborneDirect™
Ethernet Bridge User's Guide
Page 15
Quatech, Inc. Confidential
Indicator LEDs
The Heavy-Duty Bridge has four indicator LEDs for viewing its current status and connections
(see Figure 5). These indicators allow for monitoring and troubleshooting of the Bridge. They
also indicate the Bridge’s power-up status, link, connection, and data-activity status. Table 3
describes the status of the indicator LEDs.
(see Figure 5). These indicators allow for monitoring and troubleshooting of the Bridge. They
also indicate the Bridge’s power-up status, link, connection, and data-activity status. Table 3
describes the status of the indicator LEDs.
Table 3. AirborneDirect™ Heavy-Duty Ethernet Bridge Indicator LEDs
Name
Description
POST
Power on self test completed
CFG
Device has a valid IP address
LINK
Device has successfully
associated/authenticated with an AP.
associated/authenticated with an AP.
CONN
TCP/IP connection established with
device.
device.
End Cap Layout
The connectors required to attach to the device are:
Ethernet/Power: Deutsch DTM-06-12SSA
RF:
RF:
RP-SMA (Male)
Note: FACTORY RESET hole is optional, if a sealed enclosure is required.
Figure 7. End Cap Pin-out and Connector Location
CONN
LINK
CFG
POST
LINK
CFG
POST