Quatech ABDB-ET Series User Manual

 
Page 46 

AirborneDirect™ Ethernet Bridge User's Guide 

100-8007-141G 

 
 
 
 
 

 

The firmware must come from Quatech, Inc. as a .bin file and follow the 
file name format: 

 

 

DirectEthernet_ x.x.x.x.bin 

Where xxxx is the version number of the firmware. For example: 

  DirectEthernet_4.2.0.12.bin

 

 

TT

TT 

Do not attempt to load firmware for an 802.11b/g bridge on an 802.11b 
bridge or vice-versa.  

 

To update the firmware, the following sequence must be performed: 

•  Select the Update link on the ACC screen. 

•  Enter the name of the new firmware version source file. This file must be of type .bin 

and have come from Quatech, Inc. If the file is located on your hard drive, click 
Browse…

 and locate the source directory and file. 

•  Verify the correct firmware file has been selected (the file name is displayed in the File to 

 field). The file’s name structure must be as follows: 

ƒ

  DirectEthernet_x.x.x.x.bin 

o

 Where 

 is the version number of the firmware. 

• Click 

the 

 button. 

•  The message shown in 

XX

Figure 17

XX

 will be displayed. Wait for the upload to complete.