Trendnet TW100-BRV204 User Manual

Setup 

9 

Configure or use any of the following: 
•  Config File backup/restore 
•  PC Database  
•  Remote Admin 
•  Routing (RIP and static Routing) 
•  Upgrade Firmware 
•  UPnP 

Chapter 9: 
Other Features and Settings 

 

 

The TW100-BRV204 contains an HTTP server. This enables you to connect to it, and config-
ure it, using your Web Browser. Your Browser must support JavaScript. The configuration 
program has been tested on the following browsers: 
•  Netscape V4.08 or later 
•  Internet Explorer V4 or later 

Before attempting to configure the TW100-BRV204, please ensure that: 
•  Your PC can establish a physical connection to the TW100-BRV204. The PC and the 

TW100-BRV204 must be directly connected (using the Hub ports on the TW100-BRV204) 
or on the same LAN segment. 

•  The TW100-BRV204 must be installed and powered ON. 
•  If the TW100-BRV204 's default IP Address (192.168.0.1) is already used by another 

device, the other device must be turned OFF until the TW100-BRV204 is allocated a new 
IP Address during configuration. 

If your Windows system supports UPnP, an icon for the TW100-BRV204 will appear in the 
system tray, notifying you that a new network device has been found, and offering to create a 
new desktop shortcut to the newly-discovered device. 
•  Unless you intend to change the IP Address of the TW100-BRV204, you can accept the 

desktop shortcut.  

•  Whether you accept the desktop shortcut or not, you can always find UPnP devices in My 

Network Places (previously called Network Neighborhood). 

•  Double - click the icon for the TW100-BRV204 (either on the Desktop, or in My Network 

Places) to start the configuration. Refer to the following section Setup Wizard for details 
of the initial configuration process.