Trendnet TW100-BRV204 User Manual

Setup 

17 

Use the LAN link on the main menu to reach the LAN screen. An example screen is shown 
below. 

 

IP address for the TW100-BRV204, as seen from the local LAN. Use 
the default value unless the address is already in use or your LAN is 
using a different IP address range. In the latter case, enter an unused IP 
Address from within the range used by your LAN. 

The default value 255.255.255.0 is standard for small (class "C") 
networks. For other networks, use the Subnet Mask for the LAN 
segment to which the TW100-BRV204 is attached (the same value as 
the PCs on that LAN segment). 

•  If Enabled, the TW100-BRV204 will allocate IP Addresses to PCs 

(DHCP clients) on your LAN when they start up. The default (and 
recommended) value is Enabled. 

•  If you are already using a DHCP Server, this setting must be 

Disabled, and the existing DHCP server must be re-configured to 
treat the TW100-BRV204 as the default Gateway. See the follow-
ing section for further details. 

•  The Start IP Address and Finish IP Address fields set the values 

used by the DHCP server when allocating IP Addresses to DHCP 
clients. This range also determines the number of DHCP clients 
supported. 

See the following section for further details on using DHCP. 

Save the data on screen. 

The "Cancel" button will discard any data you have entered and reload 
the file from the TW100-BRV204.