Riverstone Networks WICT1-12 User Manual

25-4   Riverstone Networks RS Switch Router User Guide   Release 8.0 

Configuring RS Access Security

  Security Configuration

To configure TACACS+ security, enter the following commands in Configure mode:

Monitoring TACACS+

You can monitor TACACS+ configuration and statistics within the RS.

To monitor TACACS+, enter the following commands in Enable mode:

Specify a TACACS+ server and configure 
server-specific parameters.

Set time that TACACS+ server is ignored after it has 
failed.

Set authentication key for TACACS+ server.

Determine the RS action if there is no server 
response within a given time. 

a

a.

If this command is not specified, the RS tries the next configured authentication method (including RADIUS configuration com-

mands). Otherwise, if the server does not reply within the configured timeout period for the configured number of retries, user authen-
tication will fail.

Set the maximum number of times the TACACS+ 
server is contacted for authentication.

Set the source IP address or interface for use with 
TACACS+ server.

Set the maximum time to wait for a TACACS+ 
server reply.

Enable TACACS+.

Cause TACACS+ authentication at user login or 
when user tries to access Enable mode.

Logs specified types of command to TACACS+ 
server.

 <

>

Logs to TACACS+ server when shell is stopped or 
started on RS.

Logs to TACACS+ server SNMP changes to startup 
or active configuration.

Logs specified type(s) of messages to TACACS+ 
server.

Show TACACS+ server statistics.

Show all TACACS+ parameters.