Trendnet 108Mbps 802.11g Wireless Firewall Router User Manual
37
●
IP Range End: Type the end IP address that the rule is applied to.
Destination: Defines the destination of the incoming packet that the rule is applied to.
● Interface: Select which interface (WAN or LAN) the rule is applied to.
●
IP Range Start: Type the start IP address that the rule is applied to.
●
IP Range End: Type the end IP address that the rule is applied to.
● Protocol: Select the protocol (TCP, UDP, or ICMP) of the destination.
● Port
Range: Select the port range.
Add: Click to add the rule profile to the table at the bottom of the screen.
Update: Click to update information for the rule if you have selected a list item and have
made changes.
Delete: Select a list item and click Delete to remove the item from the list.
New: Click New to erase all fields and enter new information.
Priority Up: Select a rule from the list and click Priority Up to increase the priority of the
rule.
Priority Down: Select a rule from the list and click Priority Down to decrease the priority
of the rule.
Update Priority: After increasing or decreasing the priority of a rule, click Update
Update: Click to update information for the rule if you have selected a list item and have
made changes.
Delete: Select a list item and click Delete to remove the item from the list.
New: Click New to erase all fields and enter new information.
Priority Up: Select a rule from the list and click Priority Up to increase the priority of the
rule.
Priority Down: Select a rule from the list and click Priority Down to decrease the priority
of the rule.
Update Priority: After increasing or decreasing the priority of a rule, click Update
Priority
to save the changes.