RCA 605 User Manual
18
E-DOC-CTC-20051017-0151 v1.0
Chapter 2
Local Network Setup
2.2.1 Wireless Basics
802.11b/g
802.11b is an IEEE standard, operating at 2,4 GHz at a speed of up to 11 Mb/s.
802.11g, a newer IEEE standard also operating at 2,4 GHz, gives you up to 54
Mb/s speed, more security and better performance.
Mb/s speed, more security and better performance.
Wireless Fidelity
The Wi-Fi certification ensures that your SpeedTouch™ will interoperate with any
Wi-Fi certified 802.11g and 802.11b compliant wireless device.
Wi-Fi certified 802.11g and 802.11b compliant wireless device.
Access Point
The SpeedTouch™ Wireless LAN Access Point (AP) behaves as a networking hub
allowing to wirelessly interconnect several devices to the local (W)LAN and to
provide access to the Internet.
allowing to wirelessly interconnect several devices to the local (W)LAN and to
provide access to the Internet.
Network Name or SSID
The WLAN's 'radio' link is a shared medium. As no physical connection exists
between the SpeedTouch™ and wireless clients, a name must be given to allow
unique identification of your WLAN radio link. This is done by the Service Set ID
(SSID), also referred to as Network Name. Wireless clients must be part of this SSID
environment in order to be able to communicate with other clients on the (W)LAN -
including the SpeedTouch™.
between the SpeedTouch™ and wireless clients, a name must be given to allow
unique identification of your WLAN radio link. This is done by the Service Set ID
(SSID), also referred to as Network Name. Wireless clients must be part of this SSID
environment in order to be able to communicate with other clients on the (W)LAN -
including the SpeedTouch™.
Radio channels
The 802.11g standard allows several WLAN networks using different radio channels
to be co-located. The SpeedTouch™ supports multiple radio channels and is able to
select the best radio channel at each startup.
to be co-located. The SpeedTouch™ supports multiple radio channels and is able to
select the best radio channel at each startup.
You can choose to set the channels automatically or manually.
The SpeedTouch™ supports all channels allowed for wireless networking. However,
depending on local regulations, the number of channels actually allowed to be used
may be additionally restricted, as shown in the table below.
depending on local regulations, the number of channels actually allowed to be used
may be additionally restricted, as shown in the table below.
The different channels overlap. To avoid interference with another access
point, make sure that the separation (in terms of frequency) is as high as
possible. It is recommended to keep at least 3 channels between 2 different
access points.
point, make sure that the separation (in terms of frequency) is as high as
possible. It is recommended to keep at least 3 channels between 2 different
access points.
Regulatory Domain
Allowed Radio Channels
China
1 to 13
Europe
1 to 13
Israel
5 to 8
Japan
1 to 14
Jordan
10 to 13
Thailand
1 to 14
USA / Canada
1 to 11