Schneider Electric 17S Series User Manual

47

The following procedure and associated diagram describe how to connect cable 
shields to the front panel of the 17S drive:

Continued on next page

1

Remove a length of the cable’s outer covering and braided shield sufficient to 
expose the required length of wires.

2

Secure the exposed wires with a cable tie.

3

Remove approximately 30 mm of the cable’s outer covering while ensuring the 
braided shield is not damaged during the process.

4

At the front panel of the drive, insert a cable tie into a slot in the shielding rail.

5

Use the previously inserted cable tie to secure the exposed braided shield of 
the cable firmly against the shielding rail.