Trango Broadband M900S User Manual

Trango Broadband Wireless — User Manual M900S Rev. C

Page 48

Auto-Negotiation:

Fully supports IEEE802.3-2002 Sect. 2 Clause 28

Bridging Frame Size:

60 to 1600 bytes

Mngmt Frames:

60 to 1472 bytes (includes PING, TELNET, TFTP, HTTP)

Protection:

Bi-directional

transient

voltage protection diodes on all data lines

compliance with:
IEC61000-4-2 (ESD)
IEC61000-4-4 (EFT)
IEC61000-4-5 (Lightning)

Power Specifications
Input Voltage:

Input voltage range at unit is 10.5 VDC to 24 VDC max

Power is supplied via the unused pins of the RJ-45 Jack. Power is injected into the Ethernet cable using a junction box
(provided).

Current Cons.:

400 mA in transmit and receive modes at max power using 24 V
standard adapter (8 W) and 10 ft cable from J-BOX to unit

Protection:

28 volt Transient Voltage Suppression (TVS) on power input
Note: Voltages above 28 volts will cause damage to unit.

Mechanical and Environmental Specifications

General
Material:

High Temp Polycarbonate radome and diecast metal enclosure

Size:

12.5” x 8” x 2.75” including mounting studs

Weight:

Mounting:

2 U-Brackets, all-thread rod, nuts and washers

Connectors/Indicators
RF

Output:

Integral

internal

patch antenna per Part 15C, 15.203

External RP-SMA-f connector for external antenna

FCC Compliance:

The transceiver shall comply with the following:
FCC Part 15.407
FCC Part 15.207(a)

Operating Temp:

-40º to 60º C

Storage:

-40º

85º

Humidity:

100 % (When sealed properly.)

NEMA Rating:

NEMA 4

Shock:

Sustain 3 axis drop from 5 feet

Standard External Power Supply
24 Volt DC Power adapter and J-Box supplied with product.
Type:

Linear

wallmount

transformer

Input:

120

VAC

Output:

VDC

+/-

Max

current:

1000

Connector:

5mm DC Barrel-type Plug

Standard External Power-over-Ethernet Junction Box
Type:

In-line female-to-female RJ-45 adapter for CAT-5 Ethernet cable

Connectors:

Eth. In:

Shielded RJ-45 Jack

DC Input:

5mm DC Barrel-type Jack