Telenetics 1.2 Leaflet
M o d e m s
M o d e m s
MIU/PowerPort can be powered by delivering +5VDC (regulated) through pin 10 of the DB25. An optional 7-16VDC version is
also available. Alternatively, an external jack allows the MIU/PowerPort to be powered from a wall transformer or other
low voltage AC or DC power source.
When not on line, the dial-up MIU/PowerPort modems automatically go into a power down mode and consume only a few
microamps while inactive.
The MIU/PowerPort operates over dial and 2-wire/4-wire leased lines at full or half duplex as appropriate with various
modulations, including:
• Bell 202T
(1200bps)
• V.22bis
(2400bps)
• V.32bis
(14400bps)
The MUI/PowerPort is fully Hayes™ AT command set compatible with programmable S-registers.
All models will operate in temperatures from -40°C to +85°C and are surge protected on the analog line up to 5kV.
MIU/PowerPort
LOW VOLTAGE, DC
POWERED MODEMS
1.2, 2.4, 9.6 & 14.4 kbps
▲ Bell 202T, V.22bis, V.32bis
▲ Dial-Up and Leased Lines
▲ Powered from 5-24VDC through the Data Port
or an External Jack
▲ Automatic “Power Down” when inactive
▲ -40°C to +85°C Operating Temp.
▲ Hayes AT Compatible
▲ Ideal for Meters, Relays, RTUs, Controllers, etc.
The MIU/PowerPort is an industrial grade
modem that is designed to be powered
directly through the RS232 (DB25) data
interface port.
modem that is designed to be powered
directly through the RS232 (DB25) data
interface port.