TP-LINK TL-WA901ND User Manual
TL-WA901ND
300Mbps Wireless N Access Point User Guide
25
enter the PIN code of the AP into the field after “
Access Point PIN”. Then click Next.
The WPS Configuration Screen of Wireless Adapter
Note:
The default PIN code of the AP can be found in its label or the WPS configuration screen as Figure
4-5 .
4-5 .
You will see the following screen when the new device has successfully connected to the network.
Note:
1. The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2.
The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.
make sure the Wireless function is enabled before configuring the WPS.
4.5 Network
The
Network option allows you to customize your local network manually by changing the default
settings of the AP.
Selecting
Selecting
Network will enable you to configure the IP parameters of Network on this page.