TP-LINK TL-WR642G User Manual

 

 

14

This chapter describes each Web page's key functions. 

After your successful login, you can configure and manage the router. There are twelve main 

menus on the left of the Web-based utility. Submenus will be available after you click one of the 

main menus. The twelve main menus are: Status, Quick Setup, Network, Wireless, DHCP, 

On the right of the Web-based utility, there are the detailed explanations and instructions 

for the corresponding page. To apply any settings you have altered on the page, please click the 

 button.   

The detailed explanations for each Web page key’s function are listed below.   

The Status page displays the router's current status and configuration. All information is read-only 

This field displays the current settings or information for the LAN, including the MAC address, 

 

This field displays basic information or status for wireless function, including Wireless Radio, 

 

These parameters apply to the WAN port of the router, including MAC address, IP address, 

and WAN connection type. If PPPoE is 

chosen as the WAN connection type, the Disconnect button will be shown here while you 

are accessing the Internet. You can also cut the connection by clicking the button. If you have 

not connected to the Internet, just click Connect to establish the connection. 

This field displays the router's traffic statistics.   

The total up time of the router from when it was switched on or reset.