TP-LINK TL-WR642G User Manual

 

 

42

request. 

5.  Select the protocol used for Incoming Ports Range from the pull-down list, either TCP or 

, or All. 

6. Select 

the 

 checkbox to enable.   

7. Click 

the 

 button to save the new rule. 

 

Figure 4-28    Add or Modify a Triggering Entry 

There are many popular applications in the Popular Application list. You can select it, and the 

application will fill in the Trigger Port,  incoming Ports Range boxes and select the Enable 

checkbox. It has the same effect as adding a new rule. 

To modify or delete an existing entry: 

1. Click 

the 

in the entry you want to modify. If you want to delete the entry, click the 

. 

2.  Modify the information.   

3. Click 

the 

 button. 

Click the Enable All button to make all entries enabled 

Click the Disabled All button to make all entries disabled. 

Click the Delete All button to delete all entries 

) 

1)  When the trigger connection is released, the according opening ports will be closed. 
2)  Each rule allowed to be used only by one host on LAN synchronously. The trigger connection 

of other hosts on LAN will be refused. 

3)  Incoming Port Range cannot overlap each other. 

The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose 

service such as Internet gaming or videoconferencing. DMZ host forwards all the ports at the 

same time. Any PC whose port is being forwarded must have its DHCP client function disabled