TP-LINK tl-sl5428e User Manual
145
User Priority:
Select the user priority contained in the rule for the tagged packets to
match.
match.
Time-Range:
Select the time-range for the rule to take effect.
10.2.4 Standard-IP ACL
Standard-IP ACLs analyze and process data packets based on a series of match conditions, which
can be the source IP addresses and destination IP addresses carried in the packets.
can be the source IP addresses and destination IP addresses carried in the packets.
Choose the menu ACL→ACL Config→Standard-IP ACL to load the following page.
Figure
10-7 Create Standard-IP Rule
The following entries are displayed on this screen:
¾
Create Standard-IP ACL
ACL ID:
Select the desired Standard-IP ACL for configuration.
Rule ID:
Enter the rule ID.
Operation:
Select the operation for the switch to process packets which match the
rules.
rules.
z
Permit: Forward packets.
z
Deny: Discard Packets.
Fragment:
Select if the rule will take effect on the fragment. When the fragment is
selected, this rule will process all the fragments and the last piece of
fragment will be always forwarded.
selected, this rule will process all the fragments and the last piece of
fragment will be always forwarded.
S-IP:
Enter the source IP address contained in the rule.
D-IP:
Enter the destination IP address contained in the rule.
Mask:
Enter IP address mask. If it is set to 1, it must strictly match the
address.
address.
Time-Range:
Select the time-range for the rule to take effect.