TP-LINK AC750 User Manual
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 4 -
1.4 Panel Layout
1.4.1
The Front Panel
Figure 1-1 LEDs on the front panel
The router’s LEDs are located on the front panel (View from left to right).
Name
Status
Indication
Off
Power is off.
(Power)
On
Power is on.
Off
The wireless function is disabled.
(Wireless)
On
The wireless function is enabled. The router is working on
2.4GHz or 5GHz or both radio band.
2.4GHz or 5GHz or both radio band.
Off
No device is connected to the Ethernet ports.
(Ethernet)
On
At least one device has connected to the Ethernet ports.
Off
The Internet connection is not available.
(Internet)
On
The network is available with a successful Internet
connection.
connection.
Off
No storage device or printer is plugged into the USB port.
Flashing A plugged-in storage device or printer is being recognized.
(USB)
On
The storage device has been successfully recognized.
Slow
Flash
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
function. This process will last in the first 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function.
network by WPS function.
(WPS)
Quick
Flash
A wireless device failed to be added to the network by WPS
function.
function.
Table 1-1 The LEDs Description
Note:
1. After a device is successfully added to the network by WPS function, the WPS LED will keep
on for about 5 minutes and then turn off.
2. The router is set to work concurrently in 2.4GHz and 5GHz by default. If you desire to choose
the working frequency, please go to
.