TP-LINK AC750 User Manual

 

- 47 - 



 

DTIM Interval - This value determines the interval of the Delivery Traffic Indication Message 

(DTIM). A DTIM field is a countdown field informing clients of the next window for listening to 

broadcast and multicast messages. When the router has buffered broadcast or multicast 

messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can 

specify the value between 1-15 Beacon Intervals. The default value is 1, which indicates the 

DTIM Interval is the same as Beacon Interval.   



 

Enable WMM - WMM function can guarantee the packets with high-priority messages being 

transmitted preferentially. It is strongly recommended.   



 

Enable Short GI - This function is recommended for it will increase the data capacity by 

reducing the guard interval time

.  



 

Enabled AP Isolation - This function can isolate wireless stations on your network from 

each other. Wireless devices will be able to communicate with the router but not with each 

other. To use this function, check this box. AP Isolation is disabled by default.

 



If you are not familiar with the setting items in this page, it's strongly recommended to keep the 

provided default values; otherwise it may result in lower wireless network performance. 

Choose menu “Wireless 2.4GHz → Wireless Statistics”, you can see the MAC Address, 

Current Status, Received Packets and Sent Packets for each connected wireless station. 

 

Figure 4-27 Wireless Statistics 



 

MAC Address - The connected wireless station's MAC address 



 

Current Status - The running status of the connected wireless stations. 



 

Received Packets - Packets received by the station 



 

Sent Packets - Packets sent by the station 

You cannot change any of the values on this page. To update this page and to show the current 

connected wireless stations, click on the Refresh button.