TP-LINK AC750 User Manual

 

- 70 - 

Choose menu “USB Settings→FTP Server”, you can create an FTP server that can be accessed 

from the Internet or your local network.   

 

Figure 4-54 FTP Server Configuration 



 

Server Status - Indicates the FTP Server's current status.   



 

Internet Access - Select enable to allow access of the FTP server from the Internet. 

Otherwise, select disable to only allow local network access.   



 

Internet Address - The WAN IP address of this router, 



 

Service Port - Enter the FTP Port number to use. The default is 21.   

To set up your FTP Server, please follow the instructions below:   

1.  Plug an external USB hard disk drive or USB flash drive into this router.   

2. Click 

the Enable/Disable radio box to enable/disable Internet access to FTP from Internet 

port.  

3.  Specify a port for the FTP server to use (The default port number is 21).   

4. The Internet Address displays the WAN IP address of this router, so that other users can 

access FTP via this address.   

5.  If WAN type is PPPoE/PPTP/L2TP, two connections will be available. Therefore, users can 

access FTP server via two connections. Users in a private LAN can access ftp server via 

Public Address while Internet users can access ftp server via Internet Address.