TP-LINK TD-W8910GB User Manual

4 

 

Figure 2-2   

¾

  Line: Connect to the Modem Port of Splitter or to the telephone line. 

¾

  Reset Button: There are two ways to reset the Router's factory defaults. 

1) Use 

the 

Restore Default function on Management -> settings page in the router's 

Web-based Utility. 

2)  Use the Factory Default Reset button: Press the Reset button for more than five seconds 

and then wait for the router to reboot. 

¾

  1, 2, 3, 4 (LAN): Through these ports, you can connect the Router to your PCs and the other 

Ethernet network devices. 

¾

  Power: The Power plug is where you will connect the power adapter. 

¾

  Antenna: Used for wireless operation and data transmit. 

¾

  Make sure your computer has a Networking Interface Card (wired or wireless) before 

connecting the Router to your computer. 

¾

  An operating system supporting the TCP/IP protocol. 

¾

  Broadband Internet Access (ADSL). 

¾

  Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later. 

¾

  The Router should not be located where it will be exposed to moisture or excessive heat. 

¾

  Place the Router in a location where it can be connected to the various devices as well as to a 

power source. 

¾

  Make sure the cables and power cord are placed safely out of the way so they do not create a 

tripping hazard. 

¾

  Designed to go up to 100 meters indoors and up to 300 meters outdoors for wireless 

connection. 

¾

  The Router can be placed on a shelf or desktop.