TP-LINK AC1750 User Manual

67

Chapter 12

Specify Your Network Settings

•  802.11ac/n mixed (5Ghz): Select if you are using both 802.11ac and 802.11n wireless 

clients. 

•  802.11a/n/ac mixed (5Ghz): Select if you are using a mix of 802.11a, 802.11n and 

802.11ac wireless clients. It is strongly recommended that you select 11a/n/ac mixed. 

Channel:

 Select the channel you want to use from the drop-down list. This field 

determines which operating frequency will be used. It is not necessary to change the 
wireless channel unless you notice interference problems with another nearby access 
point.

Channel Width: 

Select the channel width from the drop-down list. The default setting is 

Automatic

, which can adjust the channel width for your clients automatically.

¾

1   Go to 

Advanced 

>

 Wireless 

>

Wireless Settings

 page.

2   Select the wireless network 2.4GHz or 5GHz.
3   Select an option from the 

Security

 drop-down list. The router provides four options, 

None, WPA/WPA2 Personal (Recommended), WPA/WPA2 Enterprise, WEP. WPA2 
uses the newest standard and the security level is the highest. We recommend you 
don’t change the default settings unless necessary. 

You can use WPS feature to add a new wireless device to your existing network quickly.  

Use this method if your client device has a Wi-Fi Protected Setup button.
1   Press the WPS/RESET button on the back panel of the modem router for 1 second.

 

2   Press the WPS button of the client device directly. 
3   The WPS LED flashes for about 3 minutes during the WPS process. 
4   When the WPS LED is on, the client device has successfully connected to the 

modem router.