TP-LINK TL-WR720N User Manual

 

To add or modify a MAC Address Filtering entry, follow these instructions: 

1.  Enter the appropriate MAC Address into the MAC Address field. The format of the MAC 

Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 
00-0E-AE-B0-00-0B. 

2.  Type the description of the PC in the Description field. Fox example: John’s PC. 
3. Select 

Enabled or Disabled for this entry on the Status pull-down list. 

4. Click 

the 

Save button to save this entry. 

To add additional entries, repeat steps 1-4. 

To modify or delete an existing entry: 

1. Click 

the 

Modify  in the entry you want to modify. If you want to delete the entry, click the 

Delete. 

2.  Modify the information.   

3. Click 

the 

Save button. 

Click the Enable All button to make all entries enabled. 

Click the Disable All button to make all entries disabled. 

Click the Delete All button to delete all entries 

Click the Next button to go to the next page and click the Previous button to return to the 

previous page. 

Fox example: If you want to block the PC with MAC addresses 00-0A-EB-00-07-BE and 

00-0A-EB-00-07-5F to access the Internet, first, enable the Firewall and MAC Address Filtering 

on the Firewall page, then, you should specify the Default MAC Address Filtering Rule "Deny 

these PC(s) with effective rules to access the Internet" on the Firewall page and the following 

MAC address filtering list on this page:

 

 

Choose menu “Security  → Local Management”, and then you can configure the management 

rule in the screen as shown in Figure 4-45. The management feature allows you to deny 

computers in LAN from accessing the Router. 

-54-