Valcom VIP-800 User Manual

1

· PABX (VIP-820 connected to a station port)
· VIP-110 Easy PC paging software
· VIP-810 plus POTS phone
· 600 Ohm Supervised Page Port
· Any of Valcom’s distributed amplified

one-way paging units (V-2003A, V-2006A,
V-2924A)

Features
·

RJ45 for network connection

· Front panel activity LED
· Network activity LED’s on RJ45
· Provides audio for up to 150 Valcom

one-way amplified speaker assemblies

· Background music input
· Contact closure or VOX operation of input
· Removable screw terminal connectors provided

for both inputs and outputs

· Page with music output, music mutes

during page

· Output control contact closure provided during

paging output

· May be used with 25 or 70 Volt amplifiers
· 2.5mm jack for DC power (115VAC TO 24VDC

adapter provided)

· NOTE:  Even after assigning a static ID address the

unit will not respond to a “Ping” test.

· 1.88" H x 5.50" W x 4.15" D

(4.78cm H x 13.97cm W x 10.54cm D)

· Weight:   0.55 lbs.  (0.25 kg)

Input Impedance:

600 Ohms

Input Level:

-10dBm nominal

Voice Switch Sensitivity:

-21dBm

Music Source Input Impedance: 8 to 600 Ohms
Music Input Level:

-10dBm nominal

Output Impedance:

8 Ohms

Output Level:

-10dBm nominal

Voltage:

24VDC

Current:

325mA

Temperature:

             0 to +40 Degrees C

Humidity:

    0 to 85% non-precipitating

947051

The VIP-800 enables voice access to a single zone of
one-way paging over an IP-based LAN/WAN. This will
allow page zone extension anywhere on the network.