Trendnet 108Mbps High Speed 802.11g Wireless Access Point User Manual
14
3.4 Advanced Setting
This page contains configurations for advanced users, which the change reflects
the wireless performance and operating modes.
the wireless performance and operating modes.
AP Mode:
Select one of the AP operating modes for different application of
Access Point.
1. AP – The normal Access Point operating mode which forms a wireless ESS
network with its wireless clients.
2. AP Client – Acts as an Ethernet-to-Wireless Bridge, which allows a LAN or a
single computer station to join a wireless ESS network through it. You must
make sure SSID and Channel is set the same as that AP you wish to connect.
1. AP – The normal Access Point operating mode which forms a wireless ESS
network with its wireless clients.
2. AP Client – Acts as an Ethernet-to-Wireless Bridge, which allows a LAN or a
single computer station to join a wireless ESS network through it. You must
make sure SSID and Channel is set the same as that AP you wish to connect.
Remote AP BSS ID
: key in the LAN Mac address (NOT wireless Mac address)
of the AP that you wish to get connected. Please note that if you leave Mac
address as 000000000000, then you will get connected by the SSID that is set in
you AP.
3. Wireless Bridge – A pair of APs operating under Bridge mode to act as the
bridge that connect two Ethernet networks or Ethernet enabled clients together.
You must make sure that the SSID and Channel is set the same as that AP you
wish to connect.
address as 000000000000, then you will get connected by the SSID that is set in
you AP.
3. Wireless Bridge – A pair of APs operating under Bridge mode to act as the
bridge that connect two Ethernet networks or Ethernet enabled clients together.
You must make sure that the SSID and Channel is set the same as that AP you
wish to connect.