TP-LINK TL-WA750RE User Manual

 

z

  LED Explanation: 

On 

A secure connection has been established. 

Flashing TL-WA750RE is establishing a secure connection. 

RE 

Off 

No connection is active. 

Flashing  The wireless function of TL-WA750RE is enabled. 

Wireless 

Off 

The wireless function of TL-WA750RE is disabled. 

On 

TL-WA750RE is on. 

Power 

Off 

TL-WA750RE is off. 

On  

A device is connected to the ETHERNET port, but there is no 
activity. 

Flashing A device is connected to the ETHERNET port, and is active. 

Ethernet 

Off 

No device is connected to the ETHERNET port. 

On(1~5) TL-WA750RE is connected to the router. More LEDs indicate a 

better connection between TL-WA750RE and the router. 

Flashing

TL-WA750RE is connected to the router, but isn’t connected to the 
Internet. 

Signal  

Strength 

 

Off 

TL-WA750RE isn't connected to the router. 

Table 1-1 

z

 

 (RANGE EXTENDER/WPS): If your Wireless router or AP supports WPS or QSS 

function, you can press the WPS or QSS button and then press the RANGE EXTENDER 
button to establish a secure connection between the Wireless router (or AP) and the Range 
Extender TL-WA750RE. 

z

  RESET: This button is used to restore the Range Extender’s factory default settings.   

There are two ways to reset the Range Extender’s factory defaults:   

Method One: With the Range Extender powered on, use a pin to press and hold the RESET 
button (about 8 seconds) until the System LED becomes quick-flash from slow-flash. And 
then release the button and wait the Range Extender to reboot to its factory default settings.   

Method Two: Restore the default settings from “System Tools > Factory Defaults” of the 
Range Extender's Web-based management page. 

z

  ETHERNET:  One 10/100Mbps RJ45 Ethernet port used to add wireless connectivity to an 

Ethernet-enabled device such as Internet TV, DVR, Gaming console and so on. Please note 
that this port is not allowed to be connected with router or AP. 

 

3