TP-LINK TD-8817 User Manual
TD-8817
ADSL2/2+ Ethernet/USB Router User Guide
19
used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your
PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoE connection.
Please enter the information accordingly.
Figure 4-7
¾
Service name: Specify a name for the PPPoE/PPPoA connection for recognition.
¾
Username: Enter your username for your PPPoE/PPPoA connection to identify and verify
your account to the ISP.
¾
Password: Enter your password for your PPPoE/PPPoA connection.
¾
Encapsulation: For both PPPoE/PPPoA connection, you need to specify the type of
Multiplexing, either LLC or VC Mux.
¾
Bridge Interface: Activate the option, the Router can also work in Bridge mode.
¾
Connection: For PPPoE/PPPoA connection, you can select Always on or Connect
on-Demand or Connect Manually. Connect on demand is dependent on the traffic. If there
is no traffic (or Idle) for a pre-specified period of time), the connection will tear down
automatically. And once there is traffic send or receive, the connection will be automatically
is no traffic (or Idle) for a pre-specified period of time), the connection will tear down
automatically. And once there is traffic send or receive, the connection will be automatically