TP-LINK TD-8817 User Manual
TD-8817
ADSL2/2+ Ethernet/USB Router User Guide
23
addresses. Each of the device's interfaces can be configured as a DHCP relay. If it is enabled,
the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To
have this function working properly, please run on router mode only, disable the DHCP server
on the LAN port, and make sure the routing table has the correct routing entry.
the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To
have this function working properly, please run on router mode only, disable the DHCP server
on the LAN port, and make sure the routing table has the correct routing entry.
Figure 4-11
•
DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN
side.
side.
)
Note:
If you select Disabled, the DHCP function will not take effect.