Avenview C-EDID-RW User Manual
www.avenview.com
8
Ensure that power is connected and proper Com Port is selected. Then click on Auto Scan ComPort
1.10.1 Read EDID
-
If you would like to read EDID information from the connected monitor, simply click on the button
“Read EDID”. If everything is connected properly, you will see a message “Finish reading the EDID
data from PC to EDID Clone”.
“Read EDID”. If everything is connected properly, you will see a message “Finish reading the EDID
data from PC to EDID Clone”.
-
Click on “Analyze” button to make a quick analysis on the read EDID information which users can
monitor or modify.
monitor or modify.
-
To save the EDID information for future reference, click on “Save File” button.
1.10.2 Write EDID
-
You can modify EDID content in the pop-up after clicking Analyze button. Also, you can load the
previously saved EDID information in the analysis window by clicking on “Load File” button
previously saved EDID information in the analysis window by clicking on “Load File” button
-
While finish editing EDID content, you can click on “Write EDID” button to write the EDID information
to EDID Reader/Writer.
to EDID Reader/Writer.