Autonet K6860899 User Manual

13. Using crimping tool (1), Mopar® p/n 05019912AA or

equivalent, crimp the splice clip and wires together.

14. Repeat the previous two steps for the ground side

wires.

15. Solder (3) the connection (2) together using rosin core

solder (1).

16. Center the heat shrink tubing (2) over the solder joint

and heat using a heat gun. Heat the joint until the tub
ing is tightly sealed and sealant (1) comes out of both
ends of the tubing.

Oct 16, 2009

K6860899 Rev.