TP-LINK TD-8811 User Manual

otherwise your ADSL2+ ROUTER may be damaged. 

¾ 

RESET(reset default): First press the reset button of ROUTER, then turn on the 

ROUTER’s power for at least three seconds. It will resume the default 

manufacturer’s setup.   

¾ 

LAN: Connect with your computer’s NIC.     

¾ 

USB: Connect with your computer’s USB interface 

¾ 

LINE(WAN): Connect to the MODEM Port of Splitter or Connecting the telephone 

line. 

 

2.4 Hardware installation procedures（figure2-1） 

The procedure to install the Router can be described in general terms in the 
following steps: 

First Step: Connecting the MODEM port of Splitter with the LINE port of the TD-8811 

ADSL2+ ROUTER by telephone line. While you need to use a telephone, please attach 

telephone line into the phone of Splitter. 

Second Step: Connect category 5 cable with RJ45 jacks to ADSL2+ ROUTER’s LAN 

port and your computer’s NIC. Or connect USB cable to ADSL2+ ROUTER’s USB port 

and your computer’s USB interface     

Third Step: Plug one end of the AC Power Adapter into the Power jack on the Ethernet 

ADSL2+ ROUTER and the other end to a standard electrical outlet. 

Last Step: Check the line connection to see if everything is ready. Power up finally. 

 

Figure2-1 

 

- 6 -