Avocent Cyclades-PR1000 User Manual
Cyclades-PR1000
33
Chapter 4 - Step-by-Step Instructions
Example 2 A LAN-to-LAN Example Using Frame Relay
This section will guide you through a complete router installation for the connection of two LANs via Frame Relay.
Figure 4.11 shows the example system used in this section. Spaces have been provided next to the parameters
needed for the configuration where you can fill in the parameters for your system. Do this now before continuing.
Figure 4.11 shows the example system used in this section. Spaces have been provided next to the parameters
needed for the configuration where you can fill in the parameters for your system. Do this now before continuing.
Central Office's
LAN
200.240.230.2
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
ETH0
SWAN
PR1000
100.130.130.1
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
V.35 DSU/CSU
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
_ _ _ 128 Kbps
Connection
Remote Site’s
LAN
PR1000
200.240.230.1
_ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _
Network IP: 15.0.0.0
_ _ _ _ _ _ _
Mask :255.255.255.0
_ _ _ _ _ _ _ _
Network IP: 100.130.130.0
_ _ _ _ _ _ _ _
Mask: 255.255.255.0
_ _ _ _ _ _ _ _
Network IP: 200.240.230.0 _ _ _ _ _ _ _ _
Mask :255.255.255.240 _ _ _ _ _ _ _ _
Mask :255.255.255.240 _ _ _ _ _ _ _ _
Public
Frame Relay
Network
16
FIGURE 4.11 CENTRAL OFFICE AND REMOTE SITE CONNECTED USING SWAN INTERFACES