Avaya 3.7 User Manual

Note:

The fields displayed in the screen are based on the type of zone selected. 

3. The media option choices depend on the media type selected and the capabilities of the 

underlying device hardware and driver. QoS

 

is used by the QoS module to restrict the 

bandwidth of the interface to the upstream limit of the network. For example, to allow QoS to 
regulate maximum bandwidth of a 100 mbps to 25 mbps, enter 25 mbps.

4. In the IP Configuration area, make the required changes.

●

From the Zone list, select the zone. Only the zones that apply to that media interface are 
displayed.

●

From the IP Config Mode list, select the IP addressing mode. Depending on your 
selection, complete the required information.

●

If public-backup is selected, complete the Idle Timer Settings configuration if failover is 
enabled.

5. Click Save when you finish.

1. From the Configuration Console Contents column, select the security gateway to be 

configured. Click the Interface tab to bring it to the front property, select the media interface 
that is configured with private, DHCP Server. Click Edit. The Media Interface Configuration 
dialog is displayed.

2. Click IP Devices. The IP Device Configuration dialog is displayed.

3. Enter the following information

●

The MAC address of the IP device. If the device is an Avaya IP telephone, the MAC 
address is on the back of the telephone.