Avaya 3.7 User Manual

Page of 326
Setting up the network
80 Avaya VPNmanager Configuration Guide Release 3.7
Figure 24: Device Users tab
To add a device account user:
1. From the Configuration Console Contents column, select the device to be configured. Click 
the Device Users tab to bring it to the front.
2. Click on the Device Account User drop-down menu to select the user.
3. In the VPN Authentication Profile area, enter the following information:
VSU/SG Address. Select the primary device from the drop-down menu or enter the DNS 
name of the device.
(Optional) Backup VSU/SG Address. Enter a backup device address to be used from 
the drop-down menu.
Port. Enter the number of the port to use. The default is 1443.
Authentication. Select the authentication type to use, either Standard (CHAP) or 
Rechallenge (PAP).
4. Click Save, to complete the configuration.
To use this configuration on another device, click the Clone To button. Select the device to 
configure, click OK to clone the configuration to the selected device.
Network Object tab
The Device>Network Object tab displays the hosts or networks that are located behind the 
security gateway. The type of predefined network objects that are listed depends on the type of 
zones that are configured for the security gateway. 
By default, the network object includes the IP address and mask that have been configured for 
the corresponding zone. Besides this address, you can add additional addresses.