AT&T 555-230-223 User Manual
Appendix E: Sample Customer Configurations
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
bbbbb
Example 2. Secure LAN, No Defaults
bbbbbbbb
DEFINITY LAN
System
Client/
Server
C2
C1
Host name =
lgateserver
IP address = 135.20.1.1
Subnet mask = 255.255.255.0
lgateserver
IP address = 135.20.1.1
Subnet mask = 255.255.255.0
Client name = lgateclient
IP address = 135.20.1.2
IP address = 135.20.1.2
IP address = 192.170.10.1
IP address = 192.170.10.2
Subnet mask = 255.255.255.0
Assembly
IP address = 192.170.10.100
Subnet mask = 255.255.255.0
Subnet mask = 255.255.255.0
Gateway
This sample configuration requires that both the DEFINITY LAN Gateway system
assembly and the client/server be administered, as follows:
assembly and the client/server be administered, as follows:
Administer the DEFINITY LAN Gateway system assembly:
1. From the Main Menu, choose TCP/IP Administration. Then choose
This Host.
A. Change the host name to a name you have made up
(
lgateserver in this example).
B. Do the same for the host IP address (
135.20.1.1 in this
example), and if subnetting is used, the subnet mask
(
(
255.255.255.0 in this example).
2. From the TCP/IP Administration Main Menu, choose Local Host
Table.
A. Delete the default client entry.
B. Press
Add
to access the Add Hosts screen. Add the entry
for the client (
lgateclient in this example) on the same
network (the same subnet if subnetting is used).
Press
CANCEL
and then select
EXIT
on this menu to return to the Main
Menu.
3. Administer the brouter. From the Main Menu, access the Brouter
A. Delete the default entry.
B. Press
ADD
entry for the client (
lgateclient in this example) on the
appropriate port and client link.
Issue 1 January 1996
E-3