ASUS DSL-N12U11N User Manual

0

Firmware Restoration is used on an ASUS ADSL router that failed 

during its firmware upgrading process. It uploads the firmware 

that you specify. The process takes about three to four minutes.

Restoration utility:
1.  Unplug the ADSL router from the power source.
.  Hold the Reset button at the rear panel and simultaneously    

re-plug the ADSL router into the power source. Release the 

Reset button when the Power LED at the front panel flashes 

slowly, which indicates that the ADSL router is in the rescue 

mode.

.  Use the following to set up your TCP/IP settings:
  IP address: 19.168.1.x
  Subnet mask: 55.55.55.0
4.  From your computer’s desktop, click  

Start > All Programs > ASUS Utility > DSL-N12U ADSL 

router > Firmware Restoration.

IMPORTANT: Launch the rescue mode before using the 
Firmware Restoration utility.