Buffalo Technology WLA-G54 User Manual

6

This completes the basic 

AirStation Configuration.To change advanced settings

consult the Buffalo Support Web Site:

http://www.buffalotech.com/wireless/support.

Once configuration is complete, connect the AirStation to your existing Local Area

Network. Plug the provided 7ft. Ethernet cable into any one of the four 10/100M

Ethernet ports on the 

AirStation 54Mbps Bridge Base Station and plug the

other end into an Ethernet  hub or switch on your Local Area Network.

The 

LAN or Wired MAC address is the

default 

ESS-ID (SSID) of the AirStation.The

LAN  MAC address is located on the rear

of the 

AirStation  clearly labeled next to

the 4-port switch.

The 

Wireless MAC address of the

AirStation is used for WDS functionality.

Once the 

AirStation is connected to the existing LAN, users accessing the

LAN through the 

AirStation must configure the computer’s TCP/IP Settings to

match your existing LAN.

Contact your network administrator if your computer requires a static IP

Address or if using DHCP Services.