Buffalo Technology WHR-HP-AG108 User Manual

Next, you need to configure your router.  This is done from a web browser on a computer 

connected to the router.  Using a computer that is connected directly to the AirStation with an 

Ethernet cable is recommended.

1

. Launch the web browser on the computer that you’re going to use to configure the AirStation.  

NOTE:  The computer used to configure the AirStation should be set to obtain an IP address 

automatically from a DHCP server.  This is the default Windows setting.

2

. Your web browser should automatically attempt to load a web page.  If the default web page 

loads then the AirStation has automatically configured your Internet connection settings.  You 

are now connected to the internet!  Please turn to page 5.

3

. If the AirStation cannot automatically configure itself for 

your Internet Connection, then a window will open, prompting 

you to enter a User ID and Password.
NOTE:  If your web browser doesn’t automatically connect you 

to the AirStation Configuration Utility, then type 192.168.11.1 

in its address field and press Enter on your keyboard. Logon 

details are as follows:
User name: root 
Password: Leave this field blank

4

. The AirStation will provide different configuration options depending on what it has auto-

detected.  Please enter specific connection information as necessary.