Billion Electric Company BIPAC-7500GL User Manual

Billion BIPAC-7500G / 7500GL 802.11g ADSL VPN Firewall Router with 3DES Accelerator

Chapter 4:Configuration

LAN to LAN PPTP Connection

Connection Name:

A user-define description of the connection.

Type:

Check Dial Out if you want your router to operate as a client (connecting to a

remote VPN server, e.g. your office server), check Dial In operates as a VPN server.

When configuring your router establish the connection to a remote LAN, enter the

remote Server IP Address (or Hostname) you wish to connection to.

When configuring your router as a server to accept incoming connections, enter the

Private IP Address Assigned to Dial in User

address.

Peer Network IP:

Enter Peer network IP address.

Netmask:

Enter the subnet mask of peer network based on the Peer Network IP setting.

Username:

If you are a Dial-Out user (client), enter the username provided by your Host.

If you are a Dial-In user (server), enter your own username.

Password:

If you are a Dial-Out user (client), enter the password provided by the your

Host. If you are a Dial-In user (server), enter your own password.

PPP Authentication Type:

Default is Auto if you want the router to determine the

authentication type to use, or else manually specify CHAP (Challenge Handshake
Authentication Protocol) or PAP (Password Authentication Protocol) if you know which
type the server is using (when acting as a client), or else the authentication type you want
clients connecting to you to use (when acting as a server). When using PAP, the
password is sent unencrypted, whilst CHAP encrypts the password before sending, and
also allows for challenges at different periods to ensure that the client has not been
replaced by an intruder.

Data Encryption:

Data sent over the VPN connection can be encrypted by an MPPE

algorithm. Default is Auto, so that this setting is negotiated when establishing a
connection, or else you can manually Enable or Disable encryption.